1784 Route 9
Lakewood Road
Toms River, NJ 08755
Phone: (732)341-2128
Fax: (732)341-8854
Galion 100U
The Galion 100U body is designed for superior service on 9900-19500 GVWR cab/chassis. Body features are 10 gauge hi-tensile steel floor, sides and ends. Front posts, two intermediate side braces, full depth rear posts and bolster and boxed material-shedding top rails are standard.
Standard Features:
- Available in lengths of 8.5-9-10.5-11'
- Material-shedding boxed top rails
- Double acting tailgate with quick relase hardware
- 10 gauge high tensile constructions
- 6" longsills
- 3" crossmember on 12" CTRS
- 3-panel tailgate
- Optional Features:
- Coal door in gate
- Air tailgate
- Additional light holes
- Bold on spreader apron
- LED lighting ILO incandescent
- Cast HD quick release top hardware
- Other gauges, material types and understructures available
- Various cab protectors (sleek, widths to 90", long version)
- Stainless steel body
Galion 100U
The Galion 400U smooth side body is especially designed for heavy-duty hauling requirements. It is well suited for bucket loading. All units are built of tough high tensile steel to virtually outlast and outperform all others. Recommended for single axle underbody hoist applications.
Standard Features:
- Horizontal pressed V-brace sides
- Material -shedding boxed top rails
- 9" floor to side radius
- 8 gauge construction throughout, 9' & 10' length
- Double acting, 6-panel tailgate
- Tarp-friendly upper gate hardware
- Full-dept rear corner posts
Optional Features:
- Aluminum construction
- 304 #4 stainless steel construction
- Coal door in gate
- Fold down sides
- Various cab protectors
- Bolt-on spreader apron
Galion 400UT
The rugged design of the Galion 400U/T series body makes it ideal for heavy loading and hauling conditions. This model is suitable for contractor, municipal and other applications where durability is key. The 400U/T series is available with front mount telescopic or underbody hoist to meet your most demanding requirements. Known the world over, Galion bodies provide the ultimate in dump body engineering, longer life and maximum performance.
Standard Features:
- Available in 9' and 10' lengths
- Material-shedding boxed top rails
- 8 gauge floor, sides & ends
- Double acting tailgate
- 6-panel tailgate
- Tarp-friendly upper gate hardware
- Full-depth rear corner posts & bolster
Optional Features:
- Formed horizontal side brace
- ILO vertical bracing
- Various cab protectors -Coal door in gate
- Air tailgate
- Bolt on spreader apron
- LED lighting ILO incandescent
- Barn door tailgate ILO double acting
- Cast HD quick release top hardware
- Other gauges, material types and understructures available
- Stainless steel sides & ends
Galion 450U
The Galion 450U is a heavy duty, crossmemberless body. The 450U is well suited for aggregate hauling and spreading, construction and patching work...at any time of the year. This heavy duty body features full depth rear corner posts and bolster, a 6-panel DA tailgate and continuous weld throughout.
Standard Features:
-9' & 10' heatable body
-Material-shedding boxed top rails
-3/16" 400BHN floor
-10 gauge 100K PSI sides
-Crossmemberless understructure
-6-panel tailgate
-Tarp-friendly upper gate hardware
-Double acting tailgate
Optional Features:
-Coal door in gate
-Air tailgate
-Additional light holes
-Bold on spreader apron
-LED lights ILO incandescent
-Cast HD quick release top hardware
-Other gauges, material types available
-Various cab protectors
-Stainless steel sides & ends
Galion 600T
The Galion 600T is a heavy duty body that "beats the cold" during low temperature use. The 600T is well suited for aggregate hauling and spreading, construction and patching work...any time of the year. This heavy duty body features full depth rear corner posts and bolster, a sloped 9-panel tailgate and continuous weld throughout.
Standard Features:
-Standard heatable body
-Material-shedding boxed top rails
-3/16" 400BHN floor
-10 gauge 100K PSI sides
-Crossmemberless understructure
-9-panel tailgate
-Tarp-friendly upper gate hardware
-Full depth rear corner posts
Optional Features:
-Asphalt package
-Coal door in gate
-Additional light holes
-Bold on spreader apron
-LED lights ILO incandescent
-Vertical and horizontal side bracing
-Other gauges, material types available
-Various cap protectors
Galion 500UT
The Galion 500U/T is excellent for over-the-highway aggregate hauling. Ideal for vocational construction and patching work, and for hauling and spreading stone, sand, gravel and other aggregates. The Galion 500U/T series utilizes high tensile steel throughout.
Standard Features:
-Available in 11'
- 19' lengths
-Material-shedding boxed top rails
-8 gauge high tensile floor and tailgate*
-10 gauge high tensile sides and front
-6-panel tailgate**
-Tarp-friendly upper gate hardware
-Full-depth rear corner posts & bolster
*15' & up has 3/16" HT floors
**53" gate & up has 9 panel gate
Optional Features:
-Nine panel tailgate
-Coal door in gate
-Air high lift gate
-Air tailgate
-Asphalt package
-Additional light holes
-Bolt on spreader apron
-2 way barn door tailgate
-Other gauges, material types, and understructures available
-LED lighting ILO incandescent
-Various cab protectors
-Smooth side design with two horizontal "V" braces ILO vertical braces
Godwin Brochures
ATHD Aluminum Trailer
OVERVIEW
The ATHD Series Aluminum Trailer is built for heavy duty performance with its high sides, continuous welded construction and sturdy understructure. The ATHD was designed to surpass the rugged needs of the coal industry and has proven its worth in other high capacity hauling needs. Weight conscious haulers specify the ATHD to maximize their hauling requirements.
ATHD
|
STANDARD SPECIFICATIONS | |||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||
AT Aluminum Trailer
OVERVIEW
The AT Series Aluminum Trailer is a well rounded workhorse. It is constructed of lightweight aluminum to satisfy the most weight conscious haulers and engineered to meet the demanding requirements of the material hauling industry. This durable aluminum trailer is well equipped as a standard purchase and many options are available to customize it to your specific needs.
STANDARD SPECIFICATIONS AVAILABLE OPTIONS
Understructure:
4” “U” Shaped Extruded crossmembers 5” I-Beam Longitudinals
Floor:
.250 Aluminum (5454-H34)
Sides:
.180 Aluminum (5454-H34)
Side Posts:
.180 Aluminum (5454-H34) Formed Box Type
Top Rail:
Heavy Duty 8” Extrusion (6061-T6)
Bottom Rail:
Heavy Duty Extrusion (6061-T6) Interlocks Sides, Floor, Vertical Braces And Lower Shedder Plate to Provide Extreme Duty Connection. Extrusion Provides 5” Internal Side To Floor Radius
Tailgate:
Air Operated Double Acting Aluminum Cylinder With Over Center Latching Mechanism And Greaseable Zerks At All Pivot Connections
Lights:
LED Lighting Per FMVSS108 Includes Sealed Harness
Bulkhead:
.180” 5454 H-34 One Piece Construction With Formed In Place 14” Radius Front Corners
Steps:
Inside And Outside Left Front
Flaps:
Full Height Anti-sail Rubber Rear, Short Rubber Front Corners
Frame:
W16x26, W16x31 or W18x35 Structural Wide Flange Hi-Tensile I-Beam
Frame Xmembers:
Hat Shaped Crossmembers
KIngPin:
18” Kingpin Setting In 3/8” High Carbon Plate
Suspension:
Page TSP Straddle Mount Single Point
Axles:
25,000 lb Capacity
Hub/Drum:
10 Stud Hub Pilot Mount
Wheels:
Steel Disc
Brakes:
16 1/2”x7” Non Asbestos With Auto Slack Adjusters
Tires:
14 Ply Tubeless Radials
Landing Gear:
2 Speed With Sand Pads, 160,000 lb Static Vertical Load
Hoist:
Front Mount Telescopic
ST Steel Series Trailer
OVERVIEW
The ST Series Steel Trailer is designed for haulers who need a tough dependable steel trailer. The ST with its continuous welded steel construction and sturdy understructure is engineered to get the job done. With many available options to complement the ST trailer, R/S can manufacture a steel trailer specially tailored for your hauling needs. The most challenging materials are no match for a properly equipped ST trailer.
ST Steel Series Trailer Standard Options
Understructure:
6” I-Beam Longitudinals 4” Channel Crossmembers
Floor:
3/16” High Tensile Steel
Sides:
10 Gauge High Tensile Steel
Side Posts:
8” Wide Box Bracing / 10 Gauge HighTensile Steel
Top Rail:
Formed Boxed or Structural Tubing
Bottom Rub Rail:
Formed 3/16” High Tensile Steel
Tailgate:
10 Gauge High Tensile Steel Cast Steel Hardware With Grease Zerks. Cast Steel Bottom Hardware Air Operated.
Lighting:
LED Per FMVSS 108
Bulkhead:
10 Gauge High Tensile Steel With Formed Channel Bracing And Radius Corners
Steps:
Inside And Out & Front Corner Step With Rubber Flaps
Construction:
Continuous Welded Construction
Frame:
16” Structural Wide Flange Hi-Tensile I-Beam W16x26, W16x31 or W18x35
Xmembers:
Hat Shaped Crossmembers
King Pin Plate:
3/8” High Carbon Plate
Paint:
Dupont Tuff-Coat Primer With Imron Elite Top Coat
Suspension:
Page TSP Straddle Mount Single Point
Axles:
25,000 lbs. Capacity
Hub/Drum:
10 Stud Hub Pilot Mount
Wheels:
Steel Disk
Brakes:
16 1/2”x7” Non Asbestos With Auto Slack Adjusters
Tires:
14 Ply Tubeless Radials
Landing Gear:
2 Speed With Sand Pads, 160,000 lbs.
Static Vertical Load
Tire Carrier:
Yes
Hoist:
Front Mount Telescopic
Available Options
- Various Heights, Lengths & Widths
- I-Beam Crossmembers
- Special Crossmember Spacing
- Extended Main Frame Rails
- Heavier Gage Deck, Sides & Ends
- Horizontal Side Braces
- Materials For Specific Applications
- Inverted Angle Top Of Gate
- Steel Or wood boards
- Inverted Angle On Top Rail
- Tubing Top Rail
- Side Swing Only Gate
- 2 Way Gate (Conventional/Side Swing)
- Air High Lift Tailgate
- 4 Latch Tailgate
- Sloping Tailgate
- Sealed Tailgate
- Winglatches On Gate
- Stoker Door/chutes
- Demolition Push Bumper
- Spreader Aprons
- Various Suspensions
- Liftable Axles
- Aluminum Disk Wheels
- Other Tire Options
- Inside Radius Plate
- Wood Cushion Floor
- Wearplates
- Man Stand/Tarp Basket
- Popular Tarp Systems
- Special Lighting
- Tool Boxes
- Choice Of Paint Colors
CS Steel Dump
OVERVIEW
The CS series steel body is designed to satisfy the needs of weight conscious haulers who rely on the durability of steel. Its engineering makes it significantly lighter yet maintains durability comparable or better than traditional steel dump bodies. A standard CS body is generously equipped, and there are numerous options available to create the perfect workhorse for your needs.
Stadard Options
- Various body lengths from 12' and side heights from 30" to 64" are standard
- 12" side to floor radius for improved dumping
- Formed trapezoid longsills with rubber cushion
- 96" wide one piece 3/16" HardOx floor with 12" rolled side to floor radius and 60" wide flat center for cleaner dumping
- Crossmemberless understructure
- 3/16" material shedding formed box top rails
- 10 gauge extra high tensile steel bulkhead
- Full length horizontal side brace each side with 10 gauge high strength sides and tailgate
- Recessed FMVSS108 L.E.D. lighting
- Signals in rear posts
- Front mount telescopic hoists sized for body lengths
- Air operated tailgate latching system
- Your choice of body color using DuPont Imron Elite paint. Availabe Options
|
|
- Vertical Side Bracing
- Smooth Side Design
- Tapered Sides
- Wood, Steel or Aluminum Boards
- Tubing Top Rail
- Sloped Tailgate
- Asphalt Tapered Rear
- Stoker Doors
- Aluminum Tailgate
- Sealed Tailgate
- Wing Latches on Tailgate
- Air High Lift Tailgate
- Inverted and Non-inverted Trunnion Mount Cylinder
|
C Steel Dump
OVERVIEW
For years R/S has provided a custom steel coal dump body to handle the tough material hauling needs of the coal industry. The C series body is designed to maximize hauling volume while maintaining structural integrity for maximized longevity.
G Steel Dump
OVERVIEW
The G series steel body is a traditional box design that has proven its worth as a tough body with endless capabilities. With its strong continuous welded construction, sturdy stacked understructure and boxed bracing, the G series is up for any challenge. This body is one of our most popular and is highly customizable with a wide rage of options.
EL Steel Dump
OVERVIEW
The EL series steel elliptical body was designed to be lightweight yet super durable. It's elliptical build makes unloading faster and cleaner than conventional box style bodies. The EL also has a lower center of gravity than conventional bodies thus helping to improve overall truck operation. With an air operated highlift tailgate which also functions as a standard tailgate, this body should be at the top of every operators list.
WG Steel Dump
OVERVIEW
Very similar to the R/S G series steel body, the WG is a traditional boxed design with stacked understructure. What sets the WG apart is its heavy duty specs. With standard I-Beam crossmembers, additional side bracing and structural tubing top rails, this body is engineered to handle rugged hauling.
SC Steel Dump
OVERVIEW
Designed for general contractors and municipal use, the SC series steel dump body is perfect for tough, small to medium size hauling jobs. It’s crossmemberless design allows for increased payloads due to its lighter weight, and its 12” floor to side radius makes for cleaner dumping.
AC Aluminum Dump
OVERVIEW
The AC series aluminum body is designed to maximize your hauling ability without using a trailer. This body was created to satisfy the hauling needs of the Appalachian coal industry though it has proven its worth in a wide range of hauling industries. The AC series body's sturdy extruded aluminum construction provides operators with a lightweight workhorse that can handle the load.
AG Aluminum Dump
OVERVIEW
Leave it to the people at R/S to deliver one of the industry's most popular aluminum construction bodies. The AG Series provides the asphalt pavers a lighter aluminum alternative. Standard features include extensive use of extrusions at all critical points tying the understructure, floor walls and posts together resulting in unsurpassed structural integrity.
AU Aluminum Dump
OVERVIEW
The R/S AU series is a versatile aluminum dump body designed to handle the work load for the 1-ton and super duty truck chassis. The smallest of the R/S aluminum body line, the AU is well developed and and highly customizable with popular options like fold down sides.